391x 3M Air Release Tool / 392x 3M Replacement Tip

This Pen-like tool from 3M is used to release air bubbles in vehicle striping, graphics, or paint protection film.

• Availability: Stock Item
• Unit of Measure: Each

3M Large Area Roller

Designed to install 3M IJ8624 Textured Surface Vinyl. Use only a high temperature heat gun of at least 1000 degress F, for comforming large areas of vinyl over a textured surface.

• Availability: Stock Item
• Unit of Measure: Each

3M Roller S

Use the Roller S for Post-Applicaton Finishing to help prevent lifting after the film has been applied.  Applying heat to the graphic to reduce the internal stress in the vinyl film. 

• Availability: Stock Item
• Unit of Measure: Each

Application Tapes

R-Tape click for more
TransferRite click for more

• Availability: Stock Item
• Unit of Measure: Each

Rivet Brushes

After the vinyl is heated and small pin holes have been poked into it.  The rivet brush is worked over and around the rivet to help bond the vinyl around the rivet.

• Availability: Stock Item
• Unit of Measure: Each

RollePro

The RollePro's ergonomic design and specially formulated heat-resistant wheel brings speed and comfort to a once time consuming application process.
How does it work for rivets? Three easy steps ...

1. Leave an open air channel at the end of a row of rivets
2. Heat the vinyl over that area to between 180°-200° F
3. Roll down the vinyl in one smooth motion. It's that easy!

• Availability: Stock Item
• Unit of Measure: Each

Torpedo Tool Set

The Torpedo Tool is designed for the use of vinyl lettering, signs and graphics. It will flow the air from under the rivet head leaving a smooth surface for the vinyl to seal against the contour of the rivet head.

• Availability: Stock Item
• Unit of Measure: Each

Vinyl Application Roller

Vehicle channel applicator tools help effectively work the heated vinyle into deep channels with out burning your hands. Proper technique includes bridging the film and the channels, heating the film and them working it into the channels.

• Availability: Stock Item
• Unit of Measure: Each

Wrap Magnets

These 43 x 6mm heavy duty magnets will hold your vinyl in place to make installation hassle free. The magnets are coated with a black rubber surface to protect your graphics and prevent scratching.

• Availability: Stock Item
• Unit of Measure: Each
• Two in a pack