Printer Parts & Accessories

Blades

SUPER STEEL BLADES
FCCB09UA2 .9mm, 30°, Vinyls
FCCB09UA5 .9mm, 30°, Vinyls
FCCB15U2SP 1.5mm, 45°, Reflective
FCCB15U5SP 1.5mm, 45°, Reflective
FCCB15UK302 1.5mm, 30°, Sandblast
FCCB15UK305 1.5mm, 30°, Sandblast
PENS
FC53001069 Pressurized Ball Point Pen
FCKF552 Fiber Tip Pen

Availability: In Stock
Unit of Measure: Each

Cleaning Fluid

For Roland SolJet Printers only (EcoSolvent & Solvent). The Roland Brand cleans and conditions the rubber and synthetic parts of your printer.

Availability: In Stock
Unit of Measure: Each

Cleaning Swabs

Use to maintain your printer. These swabs work great with the Roland Cleaning Fluid for cleaning around your heads and cap-tops.

Availability: In Stock
Unit of Measure: Each

Cut Strips

The cut protection strip is one of the most important parts on your printer cutter. It allows for straight and true cuts without any jagged edges or ruined material.

Availability: In Stock
Unit of Measure: Each

Graphtec Blade Holders

CB09 For .9mm Blade
CB15 For 1.5mm Blade

Availability: In Stock
Unit of Measure: Each

Parts

CE1000, CE2000, CE3000-60, CE5000-60
FC56CE3000-120, CE5000-120
FC562135150 48”Cut Strip
FC7000
FC51407144 30”Cut Strip
FC51407142 54”Cut Strip
FCCTO1H Cross Cut Blade
FC8000
FC0000000 00”Cut Strip
FCCTO1H Cross Cut Blade
FCOPHA23 Ethernet Kit/Card CALL
SUPER STEEL BLADES
FCCB09UA2 .9mm, 30°, Vinyls
FCCB09UA5 .9mm, 30°, Vinyls
FCCB15U2SP 1.5mm, 45°, Reflective
FCCB15U5SP 1.5mm, 45°, Reflective
FCCB15UK302 1.5mm, 30°, Sandblast
FCCB15UK305 1.5mm, 30°, Sandblast
PENS
FC53001069 Pressurized Ball Point Pen
FCKF552 Fiber Tip Pen

Availability: In Stock
Unit of Measure: Each

Roland Blade Holders

Roland Brand high quality blade holder is made from durable alloy and is designed to last longer than it’s plastic counterpart.
RCXDCH2 Alloy Blade Holder
This Roland Brand low cost blade holder is made from plastic. Both Roland blade holders are designed to hold all Roland CAMM-1 blades.
RCXDCH3 Blade Holder

Availability: In Stock
Unit of Measure: Each

Roland Blades

Roland Carbide blades are for use with all CAMM-1 cutters and Roland Print/Cut devices.
RCUSAC1451 45° Blade
RCUSAC1455 45° Blade 5 pk.
RCUSAC1601 60° Blade
RCZECU5025 45° Hi-Strength 5pk.
RCZECU3050 60° Hi-Strength 5pk.

Availability: In Stock
Unit of Measure: Each

Sheet Cut Blades

Roland Replacement blades for the cut off knife used during the Sheet Cut function. Made for Roland Print / Cut Devices and GX-Pro vinyl cutter.

Availability: In Stock
Unit of Measure: Each

Tune-Up Kit

These parts need to be inspected, cleaned and changed regularly. If they are not maintained you’ll get clogged printheads as well as gunk or drips randomly depositing onto your prints. The Tune-up Kit Includes: (1) Serge Mist Pad, (2) Wiper Blades, (1) Wiper Scraper, (1each) Pad Wipe F & TRY*, (1) Inner Serge Mist Pad*. *Not needed in some printers

Availability: In Stock
Unit of Measure: Each

Wiper Blades

When your wipers are dirty and bent, it’s time to replace them. If you don’t inspect, clean and change them often, you’ll get clogged printheads as well as gunk randomly depositing onto your prints.

Availability: In Stock
Unit of Measure: Each

Digital