Screen

Autotype/CPS

Degreaser Concentrate

CPS Degreaser Concentrate is a water-based mesh preparation that removes grease and contaminants from the screen prior to stencil application. It is offered in two concentrations: a standard 1:10/15 formula which is diluted with 10-15 parts of water for a ready to use product, and the CPS Drum Concentrate, which is mixed with 50-55 parts water for drum quantities of degreaser. More Info MSDS

Availability: Stock Item
Unit of Measure: Each

Haze Remover Liquid

CPS Haze Remover Liquid is a low-caustic product that removes ink and diazo stains from screen meshes and is a faster drying alternative to CPS Haze Remover HV (high viscosity). Haze Remover Liquid is brushed on the mesh and allowed to dry, and it can be allowed to sit on the mesh for several days if necessary. More Info MSDS

Availability: Stock Item
Unit of Measure: Each

Presswash UV

Presswash UV is a low-hazard product that is designed to remove UV inks from screens during or after the print run. It is an excellent solvent blend for on-press use, particularly at companies trying to minimize the use of harmful solvents as screen openers. Apply to the screen with a clean cloth and allow to evaporate before resuming printing. CPS Presswash UV will evaporate without leaving a greasy residue. More Info MSDS

Availability: Stock Item
Unit of Measure: Each

Screen Opener K2

Screen Opener K2 is used at the press to open dried-in image areas during print runs. Unlike competitive screen openers that can actually make ink staining worse, K2's unique formula helps to minimize staining during the print run. Simply apply K2 to the affected area of the screen with a rag or screen wipe. Dries quickly to facilitate resumption of printing. Screen Opener K2 is recommended for use with solvent based inks and 2-part ink systems. More Info MSDS

Availability: Stock Item
Unit of Measure: Each

Screen Wash A6

CPS Screen Wash A6 is a universal, slow evaporating and emulsifiable product that is suitable for removing all types of inks from screens prior to reclaiming. Simply apply Screen Wash A6 to the screen with a brush or spray system, allow it to dissolve the ink, and then rinse with water. This is an excellent product for use in shops where numerous types of inks are used. Screen Wash A6 is also suitable for use in automatic cleaning systems. More Info MSDS

Availability: Stock Item
Unit of Measure: Each

Screen Wash A7

Screen Wash A7 is a low-odor, slow evaporating product for cleaning all types of ink from screens, particularly UV ink. Simply apply A7 to the screen with a brush or spray system, allow the ink to dissolve and then remove it all with water. More Info MSDS

Availability: Stock Item
Unit of Measure: Each

Screen Wash T

Screen Wash T is formulated specifically for removing textile-printing inks prior to reclaiming. This is an emulsifiable screen wash that is aromatic free. Apply with a brush or spray system, allow the ink to dissolve and then rinse thoroughly with water. More Info MSDS

Availability: Stock Item
Unit of Measure: Each

Stain Preventer Gel 6000

Use CPS Stain Preventer Gel 6000 immediately after printing to prevent drying ink from staining the mesh. This low-odor, slow evaporating gel retards drying and can be applied with a coating trough or brush. When you are ready to reclaim the stencil, simply remove with water. CPS Stain Preventer Gel 6000 is highly recommended when screens are allowed to sit for a period of time before cleaning, e.g. when automatic cleaning systems are used. More Info MSDS

Availability: Stock Item
Unit of Measure: Each

Stencil Remover Concentrate 1:20/30 & 1:50/70

CPS Stencil Remover is a concentrated periodate-based stencil reclaimer that is mixed with water to make a highly effective, ready-to-use product. One liter of Stencil Remover Concentrate 1:20/30 is mixed with 20-30 parts water to make approximately 5-8 gallons of reclaiming solution. Stencil Remover Drum Concentrate 1:50 is mixed in larger quantities. For high volume operations, mix a 1-gallon container into 50 gallons of water for a drum of ready-to-use product. More Info
CPS Stencil Remover Concentrate, 1:20/30 MSDS
CPS Stencil CPS Stencil Remover Conc. 1:50/70 MSDS

Availability: Stock Item
Unit of Measure: Each